设为首页加入收藏
产品详情
电动刻字笔
品牌 骞鑫 型号 QX-QD-DBJ-5 额定输入功率 25(W)
柱塞行程长度 0(mm) 底板直径 0(mm) 电源类型 交流电源
电源电压 220V

 

 

申请打样或产品咨询Apply for proofing or product consultation :
联系方式:刘先生 (市场部)

Contact: Mr. Liu (marketing)

上海骞鑫数控科技有限公司

Shanghai Qian xin CNC technology co., LTD


电话: (86)021-62715097
手机:180 1649 0721
地  址:中国.上海市.普陀区.金沙江路1060号申汉大厦C座1204室.

Address: China. mailbox 1204 ,block C of Shen Han building,No. 1060  Road  Jinsha River,Shanghai,China

网  址:http://www.qianxinkj.com
       http://qianxindabiaoji.1688.com

QQ客服:2880693528

【用    途】: 本产品广泛适用于金属、瓷器、大理石、玻璃、玉石、水晶等材料上的雕刻。产品设计合理、小巧玲珑、使用便捷。深受广大消费者青睐。许多厂家及经销商为自己的产品做上暗记,消除了退货时的烦恼,减少了不必要的损失,解除了后顾之忧。

 【With the way】: This product is widely used in metal, porcelain, marble, glass, jade, the sculpture on material such as crystal. Product design is reasonable, small and exquisite, easy to use. Deeply the general consumers. Many manufacturers and distributors for their products on memorization, eliminate the trouble, when the return to reduce the unnecessary loss, remove the trouble back at home.

 【原    理】: 本产品利用交流电频率周期特性,产生受迫振动,使打印针高频振动,从而在工件上刻划出有一定深度的标记。

【 original reason 】 : this product USES ac frequency cycle characteristics, forced vibration, the print pin high frequency vibration, thus marked the score of a certain depth on the workpiece.

【使用方法】: 使用时,用手握住机身,像握笔一样,使凿头倾斜,在实物上移动雕刻。划过之处,留下永久痕迹。可变档位,深浅不一,根据不同的材质,自行合理调节。

usage : when using, the hand skin, like holding a pen, the chisel head tilt, moving sculpture in the physical. Across the left a permanent mark. Variable gear, shades, according to different materials, reasonable regulation on its own.

【电压范围 Voltage range 】: 220V/50Hz        

    率 Work rate 】:25W

【注意事项 Matters needing attention 】

1.连续使用本品,一般夏季不宜超过半小时,冬季不宜超过一小时,以免损伤线圈。

 Continuous use of this product, generally should not be more than half an hour, summer winter should not be more than an hour, so as not to damage the coil

2.为安全使用,需经常检查是否有漏电现象。

 For safe use, need to check whether there is leakage phenomenon.

3.请勿将本品置放于小孩接触区,以免意外。

Do not use this product placement in the child contact region, so as to avoid accidents.

脚注信息
版权所有 Copyright(C)2009-2014 上海骞鑫数控科技有限公司